|
Measures reported by PKTSSensorStTest
Sensors are of three types namely Fan sensor, Voltage sensor and Temperature sensor. This test monitors each of the voltage sensors and temperature sensors on the PacketShaper Load Balancer S-Series device, and reports the current status of those sensors. By carefully analyzing the status,
administrators can figure out the exact hardware component that has failed / malfunctioning due to voltage and temperature fluctuations.
Outputs of the test : One set of the results for the target PacketShaper Load Balancer S-Series device that is being monitored
The measures made by this test are as follows:
| Measurement |
Description |
Measurement Unit |
Interpretation |
| voltSensorStatus |
Indicates the current status of the voltage sensors in the load balancer. |
|
The table below indicates the values that this measure can report and their corresponding numeric equivalents:
| Measure Value |
Numeric Value |
| Voltage Ok |
0 |
| Bad voltage on CPU |
1 |
| Bad voltage on 1.1v input |
2 |
| Bad voltage on CPU, 1.1v input |
3 |
| Bad voltage on 12v input |
4 |
| Bad voltage on CPU, 12v input |
5 |
| Bad voltage on 12v, 1.1v input |
6 |
| Bad voltage on CPU, 12v, 1.1v input |
7 |
| Bad voltage on 3v input |
8 |
| Bad voltage on CPU, 3v input |
9 |
| Bad voltage on 3v, 1.1v input |
10 |
| Bad voltage on CPU, 3v, 1.1v input |
11 |
| Bad voltage on 3v, 12v input |
12 |
| Bad voltage on CPU, 3v, 12v input |
13 |
| Bad voltage on 3v, 12v, 1.1v input |
14 |
| Bad voltage on CPU, 3v, 12v, 1.1v input |
15 |
| Bad voltage on 5v input |
16 |
| Bad voltage on CPU,5v input |
17 |
| Bad voltage on 5v, 1.1v input |
18 |
| Bad voltage on CPU, 5v, 1.1v input |
19 |
| Bad voltage on 5v, 12v input |
20 |
| Bad voltage on CPU, 5v, 12v input |
21 |
| Bad voltage on 5v, 12v, 1.1v input |
22 |
| Bad voltage on CPU, 5v, 12v, 1.1v input |
23 |
| Bad voltage on 5v, 3v input |
24 |
| Bad voltage on CPU, 5v, 3v input |
25 |
| Bad voltage on 5v, 3v, 1.1v input |
26 |
| Bad voltage on CPU, 5v, 1.1v input |
27 |
| Bad voltage on 5v, 3v, 12v input |
28 |
| Bad voltage on CPU, 5v, 3v, 12v input |
29 |
| Bad voltage on 5v, 3v, 12v, 1.1v input |
30 |
| Bad voltage on CPU,5v, 3v, 12v, 1.1v input |
31 |
Note:
By default, this measure reports the above-mentioned Measure Values while indicating the current status of the voltage sensor. However, in the graph of this measure, the status of the voltage sensor will be represented using the corresponding numeric equivalents only - i.e., 0 to 31.
|
| tempSensorStatus |
Indicates the current status of the temperature sensors mounted on the hardware components of the load balancer. |
|
The table below indicates the values that this measure can report and their corresponding numeric equivalents:
| Measure Value |
Numeric Value |
| Temperature Ok |
0 |
| Bad temp on CPU sensor |
1 |
| Bad temp on RAM |
2 |
| Bad temp on RAM and CPU |
3 |
| Bad temp on Motherboard |
4 |
| Bad temp on Motherboard, CPU |
5 |
| Bad temp on Motherboard, RAM |
6 |
| Bad temp on Motherboard, RAM, CPU |
7 |
| Bad temp on Powersupply unit |
8 |
| Bad temp on Powersupply unit, CPU |
9 |
| Bad temp on Powersupply unit, RAM |
10 |
| Bad temp on Powersupply unit, CPU, RAM |
11 |
| Bad temp on Powersupply unit, Motherboard |
12 |
| Bad temp on PSU, Motherboard, CPU |
13 |
| Bad temp on PSU, Motherboard, RAM |
14 |
| Bad temp on PSU, Motherboard, CPU, RAM |
15 |
Note:
By default, this measure reports the above-mentioned Measure Values while indicating the current status of the temperature sensors. However, in the
graph of this measure, the status of the temperature sensors will be represented using the corresponding numeric equivalents only-i.e., 0 to 15.
|
|