eG Monitoring
 

Measures reported by BSGVoltSensorTest

For a Blue Coat ProxySG appliance to function without a glitch, it is essential for the hardware modules to function properly. If any of the hardware modules do not function as expected due to abnormal voltage fluctuations, then that particular module will shutdown automatically. If the modules are frequently shutdown, then the overall performance of the appliance may degrade drastically. To avoid this performance degradation, administrators should constantly keep a vigil on the voltage passing through each module. The BSGVoltSensorTest test helps administrators in this regard.

This test auto-discovers the voltage sensors in the modules of the appliance and reports the current status of each voltage sensor and the current voltage passing through each module.

Outputs of the test : One set of results for each voltage sensor available in each module of the target Blue Coat ProxySG that is being monitored.

The measures made by this test are as follows:

Measurement Description Measurement Unit Interpretation
Sensor_status Indicates the current state of this voltage sensor.   The values reported by this measure and its numeric equivalents are mentioned in the table below:

Measure Value Numeric Value
OK 1
Unavailable 2
Non operational 3

Note:

By default, this measure reports the Measure Values listed in the table above to indicate the current state of the voltage sensor. The graph of this measure however, represents the status of a sensor using the numeric equivalents only - 1 to 3.

Voltage Indicates the current voltage detected by this voltage sensor. Volts