|
Measures reported by NetCluLifPerfTest
A logical interface is an IP address associated with a physical network port on the NetApp Cluster. For logical interfaces using NAS data protocols, the interface can fail over or be migrated to a different physical port in the event of component failures, thereby continuing to provide network access despite the component failure.
This test auto-discovers the logical interfaces and for each logical interface, this test, promptly captures the processing ability, errors encountered during data transmission/reception and the uptime of the interface.
The measures made by this test are as follows:
| Measurement |
Description |
Measurement Unit |
Interpretation |
| Received_data |
Indicates the rate at which data was received by this logical interface. |
MB/Sec |
|
| Received_errors |
Indicates the rate at which erorrs occurred while receiving data through this logical interface. |
Errors/Sec |
Ideally, the value of this measure should be zero. |
| Received_packets |
Indicates the rate at which the data packets were received by this logical interface. |
Packets/Sec |
|
| Sent_data |
Indicates the rate at which data was sent through this logical interface. |
MB/Sec |
|
| Sent_errors |
Indicates the rate at which errors occurred while sending data through this logical interface. |
Errors/Sec |
Ideally, the value of this measure should be 0. |
| Sent_packets |
Indicates the rate at which data packets were sent through this logical interface. |
Packets/Sec |
|
| Uptime |
Indicates the total time duration for which this logical interface has been up. |
|
This measure displays the number of years, months, days, hours, minutes and seconds since the last reboot. |
| Diff_upTime |
Indicates the time duration for which this logical interface has been up since the last measurement period. |
Secs |
|
|