Measures reported by DellNSTSTest
This test auto-discovers the temperature sensors of the target Dell Switch N Series and reports the current temperature of each temperature sensor. By carefully analyzing the temperature of the stack units, administrators can figure out the stack units that are malfunctioning due to the temperature being out of the admissible range.
Outputs of the test : One set of results for every stack unit:temperature sensor combination of the target Dell Switch N Series being monitored.
The measures made by this test are as follows:
| Measurement |
Description |
Measurement Unit |
Interpretation |
| tsState |
Indicates the current status of this temperature sensor. |
|
The values reported by this measure and their corresponding numeric equivalents are mentioned in the table below:
| Measure Value |
Numeric Value |
| Not present |
1 |
| Operational |
2 |
| Powering |
4 |
| No power |
5 |
| Not powering |
6 |
| Incompatible |
7 |
| Failed |
8 |
Note:
By default, this measure reports the Measure Values listed in the table above to indicate the current status of each temperature sensor. The graph of this measure however, is represented using the numeric equivalents mentioned in the table above. |
| tsTemp |
Indicates the current temperature recorded by this temperature sensor. |
Celsius |
Ideally, the temperature should be well within admissible range. A sudden / gradual increase / decrease in the temperature is a cause of concern and warrants the immediate attention of the administrator. |
|