Measures reported by UnitySASTest
This test auto-discovers the SAS ports on the target storage system and for each SAS port, reports the current health. Using this test, administrators may be alerted to SAS ports that failed/degraded and replace those ports well before users complain that the target storage system is inaccessible.
Outputs of the test : One set of results for each SAS port on the target storage system being monitored.
The measures made by this test are as follows:
| Measurement |
Description |
Measurement Unit |
Interpretation |
| healthStatus |
Indicates the current health of this SAS port. |
|
The values reported by this measure and its numeric equivalents are mentioned in the table below:
| Measure value |
Numeric Value |
| Normal |
0 |
| Attention |
1 |
| Unknown |
2 |
| Degraded/Warning |
3 |
| Minor failure |
4 |
| Major failure |
5 |
| Critical failure |
6 |
| Non-recoverable error |
7 |
Note:
By default, this measure reports the Measure Values listed in the table above to indicate the current health of this SAS port. The graph of this measure however is represented using the numeric equivalents only - 0 to 7.
The detailed diagnosis of this measure lists the SAS port ID, name of the storage processor, connector type and health of the port.
|
|