eG Monitoring
 

Measures reported by RZDApInfoTest

This test auto discovers the access points controlled by the Ruckus ZoneDirector and reveals the total number of radios and authorized devices that are associated with each access point. In the process, this test reports current status, CPU utilization and memory utilization of each access point. This test also sheds light on the amount of data transmitted and received over the LAN and the number of unicast packets and multicast packets that are transmitted and received over the LAN.

Outputs of the test : One set of results for every access point controlled by the target Ruckus ZoneDirector being monitored.

The measures made by this test are as follows:

Measurement Description Measurement Unit Interpretation
Total_radio Indicates the total number of radios in this access point. Number Use the detailed diagnosis of this measure to know about MAC address of each radio available in the access points.
Total_authorized_device Indicates the total number of authorized client devices associated with this access point. Number  
Ap_status Indicates the current operational status of this access point.   The values reported by this measure and its numeric equivalents are mentioned in the table below:

Measure Value Numeric Value
Disconnected 0
Connected 100
Approval Pending 2
Provisioning 4

Note:

By default, this measure reports the Measure Values listed in the table above to indicate the current status of this access point. The graph of this measure however, represents the current status of this access point using the numeric equivalents only.

Cpu_utilization Indicates the percentage of CPU utilized by this access point. Percent  
Memory_utilization Indicates the percentage of memory utilized by this access point. Percent  
Client_receivedata_Ap Indicates the rate at which the data was transmitted from this access point. MB/Sec  
Client_senddata_AP Indicates the rate at which the data was received by this access point. MB/Sec  
Transmitted_data_LAN Indicates the rate at which the data was transmitted from this access point over LAN. MB/Sec  
Received_data_LAN Indicates the rate at which the data was received by this access point over LAN. MB/Sec  
Transmitted_packet_LAN Indicates the rate at which the packets were transmitted from this access point over LAN. Packets/Sec  
Received_packet_LAN Indicates the rate at which the packets were received by this access point over LAN. Packets/Sec  
Transmitted_ucastpacket_LAN Indicates the rate at which the unicast packets were transmitted from this access point over LAN. Packets/Sec  
Received_ucastpacket_LAN Indicates the rate at which the unicast packets were received by this access point over LAN. Packets/Sec  
Transmitted_mcastpacket_LAN Indicates the rate at which the multicast packets were transmitted from this access point over LAN. Packets/Sec  
Receieved_mcastpacket_LAN Indicates the rate at which the multicast packets were received by this access point over LAN. Packets/Sec