|
Measures reported by CpTempSensorTest
This test auto-discovers the hardware units of the Check Point Smart-1 appliance, reports the current temperature of each hardware unit in addition to reporting whether/not the LED corresponding to each hardware unit is out of range. This test perfectly pin points the hardware units that are not operating in the admissible temperature limits thus forewarning administrators to potential failure of the hardware units.
The measures made by this test are as follows:
| Measurement |
Description |
Measurement Unit |
Interpretation |
| Temperature |
Indicates the current temperature of this hardware unit. |
Celsius |
|
| Sensor_status |
Indicates whether/not the LED corresponding to this hardware unit is out of range. |
|
The values that this measure can report and their corresponding numeric values are discussed in the table below:
| Numeric Value |
Measure Value |
| 1 |
Yes |
| 2 |
Reading Error |
| 100 |
No |
Note:
By default, this measure reports the Measure Values discussed above to indicate whether/not the LED corresponding to this hardware unit is out of range. In the graph of this measure however, the Measure Values are represented using the numeric equivalents only. |
|