|
Measures reported by UCSLanCloudPcTest
You can aggregate a number of uplink ethernet ports by configuring them as a port channel, so traffic will forward between your upstream LAN switch and Cisco UCS fabric interconnect over the aggregate port channel ports as a single aggregated link.
This test auto-discovers the port channels configured on each Fabric Interconnect and reports the overall health, operational speed, and VLAN status of each port channel. With the help of this test, problematic and slow port channels can be identified.
The measures
made by this test are as
follows:
| Measurement |
Description |
Measurement
Unit |
Interpretation |
| Overall_status |
Indicates the current overall status of this port channel. |
|
The values reported by this measure and their corresponding numeric values are described in the table below:
| Measure Value |
Numeric Value |
| Indeterminate |
0 |
| Up |
1 |
| Admin-down |
2 |
| Link-down |
3 |
| Failed |
4 |
| No-license |
5 |
| Link-up |
6 |
| Hardware-failure |
7 |
| Software-failure |
8 |
| Error-disabled |
9 |
| Sfp-not-present |
10 |
Note:By default, this measure reports the above-mentioned Measure Values while indicating the overall status of a port channel. However, in the graph of this measure, port channel status will be represented using their numeric equivalents only.
The detailed diagnosis of this measure provides the complete details of a port channel, such as, the ID of the port channel, the ID of the Fabric Interconnect for which it is configured, the Type, the Port type, the flow control policy, the transport, and the port channel name. |
| Admin_state |
Indicates the current administrative status of this port channel. |
|
The values that this measure can report and the numeric values that correspond to the measure values have been detailed in the table below:
| Measure Value |
Numeric Value |
| Enabled |
1 |
| Disabled |
2 |
Note:By default, this measure reports the above-mentioned Measure Values while indicating the administrative status of a port channel. However, in the graph of this measure, states will be represented using the corresponding numeric equivalents only. |
| Admin_speed |
Indicates the current administrative speed of this port channel. |
Number |
The values that this measure can report and their corresponding numeric values are available in the table below:
| Measure Value |
Numeric Value |
| 1 Gbps |
1 |
| 10 Gbps |
2 |
| 20 Gbps |
3 |
| 40 Gbps |
4 |
Note:By default, this measure reports the above-mentioned Measure Values while indicating the administrative speed of a port channel However, in the graph of this measure, speed will be represented using the corresponding numeric values only. |
| Oper_speed |
Indicates the current operating speed of this port channel. |
Number |
The values reported by this measure and their corresponding numeric equivalents are described in the table below:
| Measure Value |
Numeric Value |
| 1 Gbps |
1 |
| 10 Gbps |
2 |
| 20 Gbps |
3 |
| 40 Gbps |
4 |
Note:By default, this measure reports the above-mentioned Measure Values while indicating the operational speed of a port channel. However, in the graph of this measure, the speed will be represented using the corresponding numeric equivalents only. |
| Vlan_status |
Indicates the current VLAN status of this port channel. |
|
The values this measure can report and their corresponding numeric values have been listed in the table below:
| Measure Value |
Numeric Value |
| OK |
0 |
| Missing-primary |
1 |
Note:By default, this measure reports the above-mentioned Measure Values while indicating the VLAN status of a port channel. However, in the graph of this measure, the VLAN status will be represented using the corresponding numeric equivalents only. |
|