This test monitors the overall health of each of the I/O Modules present in every chassis of the Cisco UCS, and in the process, promptly alerts you to abnormalities in the power, thermal, voltage states of the modules and sudden spikes in the ambient/ASIC temperature of the modules. This way, defective I/O modules come to light.

The default parameters associated with this test are as follows:

• The TEST PERIOD list box helps the user to decide how often this test needs to be executed.

• In the HOST text box, the host name of the component for which the test is to be configured has to be specified.

• Specify the port at which the specified HOST listens in the PORT text box. The default port is ‘null’.

• In the UCS USER and UCS PASSWORD text boxes, provide the credentials of the USER, who possesses atleast read-only privilege to access the Cisco UCS Manager.

• Confirm the password by retyping it in the CONFIRM PASSWORD text box.

• By default, the Cisco UCS Manager is not SSL-enabled. Accordingly, the SSL flag is set to No by default.

• By default, in most environments, Cisco UCS Manager listens on port 80 (if not SSL-enabled) or on port 443 (if SSL-enabled) only. This implies that while monitoring Cisco UCS Manager, the eG agent, by default, connects to port 80 or 443, depending upon the SSL-enabled status of Cisco UCS Manager - i.e., if Cisco UCS Manager is not SSL-enabled (i.e., if the SSL flag above is set to No), then the eG agent connects to Cisco UCS Manager using port 80 by default, and if Cisco UCS Manager is SSL-enabled (i.e., if the SSL flag is set to Yes), then the agent-Cisco UCS Manager communication occurs via port 443 by default. Accordingly, the WEBPORT parameter is set to default by default.

  In some environments however, the default ports 80 or 443 might not apply. In such a case, against the WEBPORT parameter, you can specify the exact port at which the Cisco UCS Manager in your environment listens, so that the eG agent communicates with that port for collecting metrics from the Cisco UCS Manager.

• To make diagnosis more efficient and accurate, the eG system embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option against DETAILED DIAGNOSIS. To disable the capability, click on the Off option.

  The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled:

  • The eG manager license should allow the detailed diagnosis capability.

  • Both the bad and normal frequencies configured for the detailed diagnosis measures should not be 0.

• If multiple components of the same component type are awaiting configuration, then an APPLY TO OTHER COMPONENTS check box will appear in this page. Clicking on this check box will allow you to apply the configuration to all/selected components of that type.

• Once the necessary values have been provided, clicking on the Update button will register the changes made.

When changing the configuration for specific servers, a “*” beside the text box corresponding to the parameter signifies that these values have to be manually configured by the user. The parameter values that require to be configured will typically be prefixed with a “$” or contain a series of “*”. A value of "none" in the parameter value indicates that the corresponding parameter value can be changed if required.