Agents Administration - Tests
 

Configuration of AlcLucPortStTest

This test auto-discovers all the ports of the target Alcatel-Lucent switch, and reports statistics for each port. Using this test, administrators can identify if there is a port malfunction or if there is a problem with incoming or outgoing data through the port. By taking corrective actions, administrators can help in avoiding problems from cascading through the network. All the measures are reported for each port in the switch.

The default parameters associated with this test are:

  • The TEST PERIOD list box helps the user to decide how often this test needs to be executed.

  • In the HOST text box, specify the HOST for which this test is to be configured.

  • Specify the port at which the monitored target exposes its SNMP MIB in the SNMPPORT text box

  • By default, in an IT environment, all data transmission occurs over UDP. Some environments however, may be specifically configured to offload a fraction of the data traffic - for instance, certain types of data traffic or traffic pertaining to specific components - to other protocols like TCP, so as to prevent UDP overloads. In such environments, you can instruct the eG agent to conduct the SNMP data traffic related to the monitored target over TCP (and not UDP). For this, set DATA OVER TCP flag to Yes. By default, this flag is set to No.

  • Specify the duration (in seconds) within which the SNMP query executed by this test should time out in TIMEOUT text box. The default is 10 seconds

  • By default, the eG agent supports SNMP version 1. Accordingly, the default selection in the SNMPVERSION list is v1. However, if a different SNMP framework is in use in your environment, say SNMP v2 or v3, then select the corresponding option from this list.

  • The CONTEXT parameter appears only when v3 is selected as the SNMPVERSION. An SNMP context is a collection of management information accessible by an SNMP entity. An item of management information may exist in more than one context and an SNMP entity potentially has access to many contexts. A context is identified by the SNMPEngineID value of the entity hosting the management information (also called a contextEngineID) and a context name that identifies the specific context (also called a contextName). If the Username provided is associated with a context name, then the eG agent will be able to poll the MIB and collect metrics only if it is configured with the context name as well. In such cases therefore, specify the context name of the Username in the Context text box.  By default, CONTEXT parameter is set to none.

  • This parameter appears only when v3 is selected as the SNMPversion. SNMP version 3 (SNMPv3) is an extensible SNMP Framework which supplements the SNMPv2 Framework, by additionally supporting message security, access control, and remote SNMP configuration capabilities. To extract performance statistics from the MIB using the highly secure SNMP v3 protocol, the eG agent has to be configured with the required access privileges – in other words, the eG agent should connect to the MIB using the credentials of a user with access permissions to be MIB. Therefore, specify the name of such a user against USERNAME parameter. 

  • Specify the password in the AUTHPASS text box, that corresponds to the above-mentioned Username. This parameter once again appears only if the SNMPversion selected is v3.

  • Confirm the AuthPass by retyping it in the CONFIRM PASSWORD text box.

  • The AUTHTYPE parameter too appears only if v3 is selected as the SNMPversion. From the AUTHTYPE list box, choose the authentication algorithm using which SNMP v3 converts the specified username and password into a 32-bit format to ensure security of SNMP transactions. You can choose between the following options:

    • MD5 - Message Digest Algorithm

    • SHA - Secure Hash Algorithm

  • The ENCRYPTFLAG flag appears only when v3 is selected as the SNMPversion. By default, the eG agent does not encrypt SNMP requests. Accordingly, the this flag is set to No by default. To ensure that SNMP requests sent by the eG agent are encrypted, select the Yes option. 

  • If this ENCRYPTFLAG is set to Yes, then you will have to mention the encryption type by selecting an option from the ENCRYPTTYPE list. SNMP v3 supports the following encryption types:

    • DES - Data Encryption Standard

    • AES - Advanced Encryption Standard

  • Confirm the encryption password by retyping it into the CONFIRM PASSWORD text box.

  • The ENGINEID parameter appears only when v3 is selected as the SNMPVersion. Sometimes, the test may not report metrics when AES192 or AES256 is chosen as the Encryption type. To ensure that the test report metrics consistently, administrators need to set this flag to Yes. By default, this parameter is set to No.

  • If multiple components of the same component type are awaiting configuration, then an APPLY TO OTHER COMPONENTS button will appear in this page. Clicking on this button will allow you to apply the configuration to all/selected components of that type.

  • Once the necessary values have been provided, clicking on the UPDATE button will register the changes made.

When changing the configuration for specific servers, a “*” beside the text box corresponding to the parameter signifies that these values have to be manually configured by the user. The parameter values that require to be configured will typically be prefixed with a “$” or contain a series of “*”. A value of “none” in the parameter value indicates that the corresponding parameter value can be changed if required.