Agents Administration - Tests
 

Configuration of OraExaCelDSpTest

This test auto-discovers the cell disks available in the target Oracle Exadata Storage Server and for each cell disk reports the status and the space utilization. Using this test, administrators can figure out those cell disks to which additional storage space needs to be allocated. Administrators can also isolate the cell disks that are in critical state and initiate remedial measures.

This page depicts the default parameters that need to be configured for the OraExaCelDSpTest test.

  • The TEST PERIOD list box helps the user to decide how often this test needs to be executed.

  • In the HOST text box, specify the IP address of the host for which this test is to be configured.

  • By default, this test uses the Cell Control Command-Line Interface (CellCLI) to pull out the required metrics. To use the CLI, the test first needs to connect to the target storage server via SSH, and then run commands using CLI. For running the commands, this test requires the credentials of a cellmonitor user. Specify the login credentials of such a user in the USERNAME and PASSWORD text boxes.

  • Confirm the PASSWORD by retyping it in the CONFIRM PASSWORD text box.

  • This test uses the Cell CLI to pull metrics from the target Oracle Exadata Storage Server. To run the CLI commands, this test first needs to establish an SSH connection with the target storage server. To enable the test to establish this connection, specify the SSH PORT in this text box.

  • Specify the time duration for which this test should wait for a response from the storage system in the TIMEOUT text box. By default, this is 120 seconds.

  • To make diagnosis more efficient and accurate, the eG Enterprise embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option.

    The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled:

    • The eG manager license should allow the detailed diagnosis capability

    • Both the normal and abnormal frequencies configured for the detailed diagnosis measures should not be 0.

  • Once the above values are provided, click on the UPDATE button to register the changes made.

When changing the configuration for specific servers, a “*” beside the text box corresponding to the parameter signifies that these values have to be manually configured by the user. The parameter values that require to be configured will typically be prefixed with a “$” or contain a series of “*”. A value of “none” in the parameter value indicates that the corresponding parameter value can be changed if required.