|
Measures reported by LVXCLEDStatTest
Lenovo XClarity controller is embedded in most Lenovo ThinkSystem servers. The XClarity controller consolidates the service processor functionality, super I/O, video controller, and remote presence capabilities into a single chip on server system board. The XClarity controller controls the status of LEDs on the server. LED command can be used from command line interface to change the status of LEDs. The purpose of this test is to establish that XClarity controller is able to read and change the status of server LEDs and LEDs are working as expected.
This test reports the status of LEDs and if the status of any of the LEDs is unexpected, administrators acan immediately look into it before it can cause issues.
Outputs of the test: One set of results for XClarity Controller.
The measures made by this test are as follows:
| Measurement |
Description |
Measurement Unit |
Interpretation |
| idLED |
Indicates the current status of Identity LED. |
|
If the status of LED is not as per expected, you need to investigate and take corrective action of necessary.
The values reported by this measure and its numeric equivalents are mentioned in the table below:
| Measure Value |
Numeric Value |
| Off |
0 |
| On |
1 |
| Blinking |
2 |
| Not Available |
3 |
Note:
By default, this measure reports the Measure Values listed in the table above to indicate the current status of this fan. The graph of this measure, however, represents the status of the fan using the numeric equivalents only.
|
| infoLED |
Indicates the current status of Identity LED. |
|
If the status of LED is not as per expected, you need to investigate and take corrective action of necessary.
The values reported by this measure and its numeric equivalents are mentioned in the table below:
| Measure Value |
Numeric Value |
| Off |
0 |
| On |
1 |
| Blinking |
2 |
| Not Available |
3 |
Note:
By default, this measure reports the Measure Values listed in the table above to indicate the current status of this fan. The graph of this measure, however, represents the status of the fan using the numeric equivalents only.
|
|