Measures reported by LHSysTempTest
Abnormal temperature of the hardware components often lead to the malfunctioning of the storage system which when left unnoticed may affect the overall health. This test auto-discovers the hardware components in each storage node and for each hardware component, this test reports the current status and temperature. Using this test, administrators can determine the hardware components that were damaged.
Outputs of the test : One set of results for each storage node: hardware component combination on the target storage system being monitored.
The measures made by this test are as follows:
| Measurement |
Description |
Measurement Unit |
Interpretation |
| Status |
Indicates the current status of this hardware component. |
|
The values reported by this measure and their corresponding numeric equivalents are mentioned in the table below:
| Measure Value |
Numeric Value |
| Normal |
1 |
| Abnormal |
2 |
Note:
This measure reports the Measure Values listed in the table above to indicate the current state of each hardware component. However, in the graph of this measure, the state is indicated using the Numeric Values listed in the above table. |
| Temperature |
Indicates that current temperature of this hardware component. |
Celsius |
Ideally, the temperature should be well within admissible range. A sudden / gradual increase /decrease in the temperature is a cause of concern and warrants immediate attention of the administrator. |
|