Measures reported by HBladeSWModLEDTest
Each switch module of the target Hitachi Compute Blade contains a set of LEDs using which the administrator can easily identify the health of the switch module. If the LEDs are found to be faulty or is damaged, then problematic switch modules may not be identified instantly which may sometimes lead to malfunctioning of the target Hitachi Compute Blade and its corresponding business services. In order to avoid such issues, it is necessary for the administrators to replace the faulty LEDs at the earliest. This is where the HBladeSWModLEDTest test helps!
Using this test, administrators can determine the current status of each LED on the switch module and color of each LED. This way, administrators may be alerted to failure of the LEDs and help them replace the LEDs immediately.
The measures made by this test are as follows:
| Measurement |
Description |
Measurement Unit |
Interpretation |
| Led_Status |
Indicates the current status of this LED. |
|
The values that this measure can report and the numeric values they indicate have been listed in the table below:
| State |
Numeric Value |
| Turn Off |
1 |
| Turn On |
2 |
| Unknown |
3 |
| Blink |
4 |
| Blink Fast |
5 |
| Blink Slow |
6 |
Note:
By default, this measure can report the Measure Values mentioned above while indicating the current status of this LED in the switch module. However, the graph of this measure is indicated using the numeric equivalents.
|
| Led_color |
Indicates the color emitted by this LED. |
|
The values that this measure can report and the color they illuminate have been listed in the table below:
| Color |
Numeric Value |
| Blue |
1 |
| Green |
2 |
| Red |
3 |
| Amber |
4 |
| Unknown |
0 |
Note:
By default, this measure can report the Colors mentioned above while indicating the color of this LED. However, the graph of this measure is indicated using the numeric equivalents.
|
|