|
Measures reported by HvSwitchPortTest
This test reports the network traffic flowing into and out of every virtual switch port (i.e., virtual NIC) on the Hyper-V host. This test is disabled by default. To enable the test, open the AGENTS - TESTS CONFIGURATION page by following the Agents -> Tests -> Configure menu sequence, select Hyper-V as the component-type, scroll down to the DISABLED TESTS section, select the check box corresponding to the Hyper-V Switch Ports test, and click the Update button therein.
| Measurement |
Description |
Measurement
Unit |
Interpretation |
| Broadcast_packets_received |
Indicates the total number of packets received per second by this port. |
Packets/Sec |
|
| Broadcast_packets_sent |
Indicates the total number of packets sent per second by the switch. |
Packets/Sec |
|
| Data_received |
Indicates the rate at which bytes were received by the port. |
Mbps |
|
| Bytes_sent |
Indicates the rate at which bytes of data were sent by the port. |
Mbps |
|
| Packets_received |
Indicates the total number of packets received by the port per second. |
Packets/Sec |
|
| Data_transmitted |
Indicates the total number of packets sent by the port per second. |
Packets/Sec |
|
|