|
Configuration of JvmMemoryDetailsTest
This test monitors every memory type on the JVM and reports how efficiently the JVM utilizes the memory resources of each type.
The default parameters associated with this test are as follows:
- In the HOST text box, the host name of the server for which the test is to be configured has to be specified.
This test can extract metrics from the Java application using either of the following mechanisms:
- Using SNMP-based access to the Java runtime MIB statistics;
- By contacting the Java runtime (JRE) of the application via JMX
To configure the test to use SNMP, select the SNMP option. On the other hand, choose the JMX option to configure the test to use JMX instead. By default, the JMX option is chosen in the MODE text box.
The JMX REMOTE PORT parameter appears only if the MODE is set to JMX . Here, specify the port at which the JMX listens for requests from remote hosts. Ensure that you specify the same port that you configured in the management properties file in the <JAVA_HOME>\jre\lib\management folder used by the target application.
The USER, PASSWORD, and CONFIRM PASSWORD parameters appear only if the MODE is set to JMX. If JMX requires authentication only (but no security), then ensure that the USER and PASSWORD parameters are configured with the credentials of a user with read-write access to JMX. To know how to create this user, refer to Section 1.1.1.2 of the Monitoring Java Applications document. Confirm the password by retyping it in the CONFIRM PASSWORD text box.
The JNDINAME parameter appears only if the MODE is set to JMX. The JNDINAME is a lookup name for connecting to the JMX connector. By default, this is jmxrmi. If you have resgistered the JMX connector in the RMI registery using a different lookup name, then you can change this default value to reflect the same.
By default, the eG agent supports SNMP version 1. Accordingly, the default selection in the SNMPVERSION list is v1. However, if a different SNMP framework is in use in your environment, say SNMP v2 or v3, then select the corresponding option from this list.
The community string of the Cisco device has to be provided in the SNMPCOMMUNITY text box. This parameter is specific to SNMP v1 and v2 only. Therefore, if the SNMPVERSION chosen is v3, then this parameter will not appear. The USERNAME parameter appears only when v3 is selected as the SNMPVERSION. SNMP version 3 (SNMPv3) is an extensible SNMP Framework which supplements the SNMPv2 Framework, by additionally supporting message security, access control, and remote SNMP configuration capabilities. To extract performance statistics from the MIB using the highly secure SNMP v3 protocol, the eG agent has to be configured with the required access privileges - in other words, the eG agent should connect to the MIB using the credentials of a user with access permissions to the MIB. Therefore, specify the name of such a user against the USERNAME parameter. The CONTEXT parameter appears only when v3 is selected as the SNMPVERSION. An SNMP context is a collection of management information accessible by an SNMP entity. An item of management information may exist in more than one context and an SNMP entity potentially has access to many contexts. A context is identified by the SNMPEngineID value of the entity hosting the management information (also called a contextEngineID) and a context name that identifies the specific context (also called a contextName). If the USERNAME provided is associated with a context name, then the eG agent will be able to poll the MIB and collect metrics only if it is configured with the context name as well. In such cases therefore, specify the context name of the USERNAME in the CONTEXT text box. By default, this parameter is set to none. Specify the password that corresponds to the above-mentioned USERNAME in the AUTHPASS text box. This parameter once again appears only if the SNMPVERSION selected is v3. Confirm the AUTHPASS by retyping it in the CONFIRM PASSWORD text box. The AUTHTYPE parameter too appears only if v3 is selected as the SNMPVERSION. From the AUTHTYPE list box, choose the authentication algorithm using which SNMP v3 converts the specified USERNAME and PASSWORD into a 32-bit format to ensure security of SNMP transactions. You can choose between the following options:
- MD5 - Message Digest Algorithm
- SHA - Secure Hash Algorithm
The ENCRYPTFLAG appears only when v3 is selected as the SNMPVERSION. By default, the eG agent does not encrypt SNMP requests. Accordingly, the ENCRYPTFLAG is set to NO by default. To ensure that SNMP requests sent by the eG agent are encrypted, select the YES option. If the ENCRYPTFLAG is set to YES, then you will have to mention the encryption type by selecting an option from the ENCRYPTTYPE list. SNMP v3 supports the following encryption types:
- DES - Data Encryption Standard
- AES - Advanced Encryption Standard
Specify the encryption password in the ENCRYPTPASSWORD text box. Confirm the encryption password by retyping it in the CONFIRM PASSWORD text box. Specify the duration (in seconds) within which the SNMP query executed by this test should time out in the TIMEOUT text box. The default is 10 seconds.
The HEAP ANALYSIS parameter is set to off by default. This implies that the test will not provide detailed diagnosis information for memory usage, by default. To trigger the collection of detailed measures, set this flag to On.
Note:
If the HEAP ANALYSIS parameter is turned on, then DETAILED DIAGNOSIS for the measures will be collected, only if the Java application being monitored uses JDK 1.6 or above.
The JAVA HOME parameter appears only when the HEAP ANALYSIS flag is switched On. Here, provide the full path to the install directory of JDK 1.6 or higher on the application host. For example, c:\JDK1.6.0.
The detailed diagnosis of this test, if enabled, lists the Java classes/packages that are using the pool memory and the amount of memory used by each class/package. To enable administrators to focus on the memory consumed by those classes/packages that are specific to their application, without being distracted by the memory consumption of basic Java classes/packages, the test, by default, excludes some common Java packages from the detailed diagnosis. The packages excluded by default are as follows:
- All packages that start with the string java or javax - in other words, java.* and javax.*.
- Arrays of primitive data types - e.g., [Z, which is a one-dimensional array of type boolean, [[B, which is a 2-dimensional array of type byte, etc.
- A few class loaders - e.g., <symbolKlass>, <constantPoolKlass>, <instanceKlassKlass>, <constantPoolCacheKlass>, etc.
This is why, the EXCLUDE PACKAGES parameter is by default configured with the packages mentioned above. You can, if required, append more packages or patterns of packages to this comma-separated list. This will ensure that such packages also are excluded from the detailed diagnosis of the test. Note that the EXCLUDE PACKAGES parameter is of relevance only if the HEAP ANALSIS flag is set to ‘Yes’.
By default, the INCLUDE PACKAGES parameter is set to all. This indicates that, by default, the detailed diagnosis of the test (if enabled) includes all classes/packages associated with the monitored Java application, regardless of whether they are basic Java packages or those that are crucial to the functioning of the application. However, if you want the detailed diagnosis to provide the details of memory consumed by a specific set of classes/packages alone, then, provide a comma-separated list of classes/packages to be included in the detailed diagnosis in the INCLUDE PACKAGES text box. Note that the INCLUDE PACKAGES parameter is of relevance only if the HEAP ANALSIS flag is set to ‘Yes’.
The DD FREQUENCY refers to the frequency with which detailed diagnosis measures are to be generated for this test. The default is 1:1. This indicates that, by default, detailed measures will be generated every time this test runs, and also every time the test detects a problem. You can modify this frequency, if you so desire. Also, if you intend to disable the detailed diagnosis capability for this test, you can do so by specifying none against DD FREQUENCY.
To make diagnosis more efficient and accurate, the eG Enterprise suite embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option.
The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled:
- The eG manager license should allow the detailed diagnosis capability
- Both the normal and abnormal frequencies configured for the detailed diagnosis measures should not be 0.
By default, in an IT environment, all data transmission occurs over UDP. Some environments however, may be specifically configured to offload a fraction of the data traffic - for instance, certain types of data traffic or traffic pertaining to specific components - to other protocols like TCP, so as to prevent UDP overloads. In such environments, you can instruct the eG agent to conduct the SNMP data traffic related to the monitored target over TCP (and not UDP). For this, set the DATA OVER TCP flag to Yes. By default, this flag is set to No. If multiple components of the same component type are awaiting configuration, then an APPLY TO OTHER COMPONENTS check box will appear in this page. Clicking on this check box will allow you to apply the configuration to all/selected components of that type. Once the necessary values have been provided, clicking on the Update button will register the changes made.
When changing the configuration for specific servers, a “*” beside the text box corresponding to the parameter signifies that these values have to be manually configured by the user. The parameter values that require to be configured will typically be refixed with a “$” or contain a series of “*”. A value of "none" in the parameter value indicates that the corresponding parameter value can be changed if required.
|